FujiFilm Instax Share SP-3
| Article number: | 141301 |
| Availability: | In stock (1) |
The instax SHARE SP-3 is fast. Maybe not as fast as a rocket, but with the instax laser exposure system the SHARE SP-3 can achieve a printing time of just 13 seconds. Astounding. Plus, printing noise is incredibly low, unlike a rocket.
Open up the instax SHARE app and get carried away with endless filter options. Make colours punchier, enhance the mood in your shot or even take colour away. All before connecting to the SHARE SP-3 and hitting print.
- Film – Fujifilm Instant Colour Film "instax SQUARE" (sold separately)
- Film – Size 86mm x 72mm Picture Size 62mm x 62mm
- Film Developing Time – Approximately 90 seconds (Varies depending on the ambient temperature)
Printing Specs- Printing resolution – 318 dpi
- Printing levels – 256 levels per colour (RGB)
- Interface Standard compliance -IEEE802.11b/g/n, Operation frequency: 2412 MHz to 2462 MHz (11 ch)
- Supported image format – JPEG, PNG
- Printing time – Image recording – photo output (Feed out) Approx. 10 sec.
- Approximate printing capacity – Approx. 100 prints (Based on our test conditions) *Varies depending on the conditions of use.
- Compatible FUJIFILM X Series models: X-A5, X-E3, X-T2, X-T20, GFX50S, X-Pro2, X-T1, X100F
- NP-50 battery. Charging time – Approx. 3 hours (Varies depending on the battery remaining level)
- Power consumption – 3 W
- Operating temperature – +5°C to + 40°C / +41°F to + 104°F (no condensation)
Dimensions
- 116 mm x 130.5 mm × 44.4 mm (excluding projections)
- 312g (without battery and film pack)